The ultimate resource for labels tapes and decals


Make your own music box

Those of you who love to enjoy a challengeand an X-acto knife, cur greeting card to fit
and like to do creative crafts and thereforetop of the box. Apply a thin coat of
making your own music box can contain lots ofdecoupage to lid top and place card in
fun. Here are directions to make a uniqueposition.
music  box  called  "Around  the  world.
3.
Things  you  need
By using an old paintbrush, apply a thin
Unfinished recipe box of 5 ¾ wide * 3 ¾layer of tacky glue to wrong side of one
"deep * 4" high 18 note key wind musicalultra suede strip. Start from the bottom
movement T bar winding key, ¾ " De'front left corner, ¾ "in from side and 1
coupage sandpaper wood sealer. Decorative½" from bottom, press strip to the box.
accessories for music box such as assortmentSlide a buckle on and make a small hole to
of stamps, greeting card or postcard withaccommodate the stem of the buckle at center
traveling photo 2 brown ultra sued strips, 11" from the end. Using scissors, cut corners
2" wide * 16 ½ " long 2 buckles, ½ " 4of ultra suede strip on a 45 degree angle.
brass corner brackets, 5/8" hasp catch, 1Repeat the process for remaining ultra suede
¾  *  5/8"  small  padlock.strip on a 45 degree angle. Repeat the
process for remaining ultra suede strip on
Acrylic paint color: blue- gray, adhesivesthe other side of box. Allow to dry
and spray sealer, industrial strength gluethoroughly.
tacky glue gloss spray sealer, tools and
brushes, drill with ¼" drill bit hammer4.
old paintbrushes paintbrush ruler scissors
X-acto  knife.Now use the X-acto knife and carefully cut
the opening between the box and lid, starting
Gather  step  by  stepthe  back.
1. Use sandpaper, sand box and use an old5.
paintbrush, apply wood sealer to the box by
following the manufacturer's directions.Next drill a ¼" hole at the center back of
Allow  to  dry  thoroughly.box ¾" from the bottom. Use industrial
strength glue, glue musical movement inside
1.box, making sure the winding key shaft is
centered in hole. Allow it to dry thoroughly.
Use a paintbrush, paint the box inside and
outside  with  blue  gray  acrylic  paint.6.
2.Carefully hammer the corner brackets on the
box. Turn the box back side down, center hasp
By using an old paintbrush, apply a thincatch and carefully hammer in nails. Then
layer of decoupage to box and sides of thepull padlock on hasp catch and wind on
lid, working an area of about 3" square at awinding key. Fill your box with favorite
time. Place stamps on the box and lid sides,vacation  photos.
overlapping them as desired. Stamps should be
placed over opening between lid and box soFor more information, visit our recommended
that it could be cut open later. Use a rulerwebsite music-future.