How Effective is Dust Control Equipment?

When searching for the right dust control equipmentcollection tank is needed in the duct work. This is
for your problem, the type and source of your dust iswhere the dust is separated from the air. At the end
where you should start when searching for a solution.of the duct work is the air power supply. This is a fan
If it is an indoor dust problem you have and the resultthat must have sufficient power to keep the particles
from a manufacturing process, then containment at theairborne until the desired separation occurs in the
source is the best approach. If the dust that iscollection tank.
produced can be sprayed with water and reintegratedFor outdoors problems, the task is much easier. The
into your process, like coal mining, then a set of spraytypical problem is caused by soil. By maintaining the
nozzles should be located where the creation of dustproper amount of moisture in the soil, most dust
is predominantly occurs. Common areas where thisproblems can be avoided. For construction sites, the
problem occurs usually involve cutting, drilling orbest piece of dust control equipment for this job is a
transporting of a material. While a variety of wettingtanker truck fitted with spray nozzles to wet the top
agents exist, water is the most common form and issoil.
the most inexpensive.Another useful piece of dust control equipment is the
If the dust cannot be returned to the process, then amister fan. This is the same type of fan used on the
mechanical means to transport it out is required. Thissidelines of major sporting events to keep athletes
will involve a collection hood that negotiates the dustcool. This same equipment can knock dust out of the
through a series of ducts. This suspends the dust inair and can therefore solve the dust problem in a
the air. Before the dust can fall out of the air, aconfined or limited area.